top of page
Yacht vue de dessus

A sun shield?
A fun slide?
A discreet place to sunbathe?
You choose...

Sea2party offers you 4 exclusive models to customize to fully enjoy your boat and the sea

  • The colors below are not contractual. Consult the "Your project" section to discover the colors available

SkyTrek

SkyTrek

The SkyTrek model fits harmoniously on the foredeck of a yacht. Choosing SkyTrek means adding to your boat a structure with a modern design that you will appreciate for its shade when you are at anchor or at the quay. And you can also use the rear half structure as a slide (*). 

SkyFall

SkyFall

The SkyFall model is ideal if you want to enjoy your sunbathing away from the rest of the boat: the structure is narrow at the front to let the sun through but wide at the rear to keep you out of sight. Sunbathe in complete serenity. This model may be suitable for slide use (*).

SkyShield

SkyShield

The SkyShield model offers a narrow base and a wider top which facilitates access under the structure. It will protect you from the sun and can in some cases be used as a slide (*). Is this the most suitable model for your use? It's up to you.

SkyFlat

SkyFlat

SkyFlat is the simplest model in the range. It can also create a separate space and some shade on your boat, but it is certainly the possibility of using it as a slide that will motivate your choice for this model (*).

*possibility depending on your choices for your project (material, dimensions)

Présentation des modèles Sea2party
SkyTrek

Model shown: SkyTrek

Sea2party will meet your desire for change:
after purchasing your structure, you can change its color or add options that enhance your experience.

To discover in the section "Your project"

Heureux sont les adultes qui gardent leur âme d'enfant
Technical informations

Materials: The structures designed by Sea2party are both light, resistant and suitable for the marine environment. The endurance of the structure has been validated by external research and development company specialized in inflatable structures; certain materials and processes are inspired by those used for manufacturing Wing Foil sails.

Manufacturing: Upon receipt of your specifications, the design office models your structure on a computer. The different elements of the structure are computed, then cut then assembled and fitted. The cover fabric as well as the side fabrics (optional) are cut and adapted according to your structure.

Installation and storage: The structure has been designed to be as light as possible. And to further minimize the weight to be transported and facilitate its storage in the boat, the structure is made of 2 parts (except SkyFlat model). The assembly of the 2 parts is very simple: each part is equipped with rings and ropes provided for assembly. 

Inflation: Inflation time is approximately 5 minutes for a half structure using an electric inflator. The operating pressure will be printed near to the inflation valve. If there is no information for the operating pressure, the structure can be inflated until the relief valve is triggered. We recommend that you use an electric inflator to simplify inflation but also deflation. You will find light and compact models intended for inflating inflatable boats at your ship chandler. For example, you can find out about SCOPREGA inflators. 

Upkeep:  Rinse the structure with fresh water if you used it as a slide, especially at the inflation valves and zips; don't forget to let it dry before storing it. That's it for the upkeep!

bottom of page